The RHP14 is a non-insulated telescoping platform with a working height of 14 ft. (4.27 m) and 16.5 ft. (5 m) of side reach. The “P” in RHP14 is in referral in Platform. Developed in conjunction with the Ministry of Transport of Quebec, the product RHP14 is tailored to the specific requirements of roadside maintenance and signage.
This unit stands out for the RH crowd! It has a unique proportional & instinctive hydraulic control, auto-levelling controlled floor space and is installed at the back of the chosen vehicle. This unit can be mounted on vehicles wide enough to great the platform.
The use of STRENX steel comes in handy; you get the durability and quality of an RH Aerial Lift Equipment and a greater pay load normally associated with bigger rigs. Key in hand option is available to you. Please feel free to contact us to see what we can offer for your chosen vehicle and configuration.
|Est. working height (A)||4.87 (14')|
|Horizontal reach (B)||5.15m (16’9'')|
|Length (retracted) (C)||2.37m (7'8'')|
|Interior width (D)||49 cm (19")|
|Bucket capacity||159 kg (350 lbs)|
|Lifting ring||250 kg (550 lbs)|
|Elevation degrees||-0° to 45°|
|Approx. weight||385kg (850 lbs)|
|GVWR min. required||7938 kg (17500 lbs)|
|Hydraulic pressure||20684 kPa (3000 psi)|
* Informations shown can vary depending on truck and/or options
ask a representative for more details
The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.
In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.
RH Ladder uses advanced structural optimizing simulations to ensure safety and enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and manufacturability.
This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.
The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.
We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.
*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside of its production facilities
Accuracy is crucial to achieve consistent quality. RH Ladder uses waterjet and laser cutting, along with robotic welding to deliver constant precision and reliability.
Numeric tooling technologies