RH44_ENG AERIAL LADDER BOOM TRUCK TELESCOPIC LADDER

The RH44 is a non-insulated telescoping ladder with a working height of 44 ft. (13.41 m) and an amazing side reach of 32 ft. (9.90 m). This is a three sections ladder for extra effectiveness. The lifting ring is located at the end of the second section as a standard accessory and can lift up to 550 lbs (250 kg) in any position, regardless of carrier vehicle.

This unit can be mounted on different chassis as long as the GVWR (gross vehicle weight rating) is greater than 17,500 lbs (7,938 kg) like Ford F550 or E550, Hino, Freightliner and so many more.

No need to say that RH has many other benefits and options available to ensure that we meet your exact needs. Key in head option is available. Contact us to see what we can do for your preferred chassis and configuration.

Specification
Est. working height (A)	10.67m (35')	11.28 m (37')	11.58 m (38')
Horizontal reach (B)	7.42m (24’4'')	8.39 m (27'4'')	8.39 m (27' 6")
Length (retracted) (C)	3.76m (12'4'')	4.97 m (16' 4")	4.37 m (14' 4")
Interior width (D)	49 cm (19")	60 cm (23")	49 cm (19")
Bucket capacity	159 kg (350 lbs)	159 kg (350 lb)	159 kg (350 lb)
Lifting ring	250 kg (550 lbs)	N/A	250 kg (550 lbs)
Rotation	360° continuous (opt.)	360° continue (opt.)	360° continue (opt.)
Elevation degrees	-8° to 85°	-8° to 85°	-8° to 85°
Approx. weight	544 kg (1150 lbs)	445 kg (980 lb)	498 kg (1100 lb)
GVWR min. required	4309 kg (9500 lbs)	4309 kg (9500 lb)	4309 kg (9500 lb)
Hydraulic pressure	20684 kPa (3000 psi)	20684 kPa (3000 psi)	20684 kPa (3000 psi)

Specification
Est. working height (A)	12.5m (41')	13.41m (44')	14.33m (47')
Horizontal reach (B)	9.25m (30' 4")	10.05m (33’)	11.07m (36' 4")
Length (retracted) (C)	4.37m (14' 4")	5.17m (17')	4.98m (16' 4")
Interior width (D)	49 cm (19")	49 cm (19")	49 cm (19")
Bucket capacity	159 kg (350 lbs)	159 kg (350 lb)	159 kg (350 lb)
Lifting ring	250 kg (550 lbs)	250 kg (550 lbs)	250 kg (550 lbs)
Rotation	360° continuous (opt.)	360° continue (opt.)	360° continue (opt.)
Elevation degrees	-8° to 85°	-5° to 85°	-5° to 85°
Approx. weight	522 kg (1150 lbs)	567 kg (1250 lbs)	612 kg (1350 lbs)
GVWR min. required	5216 kg (11500 lbs)	7938 kg (17500 lbs)	8620 kg (17500 lbs)
Hydraulic pressure	20684 kPa (3000 psi)	20684 kPa (3000 psi)	20684 kPa (3000 psi)

The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.

In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.

This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.

The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.

We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.

*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside its production facilities