rh50d

options
The RH50D is an insulated telescoping ladder with a working height of 50 ft (15.24 m), comprising three ladder sections for optimal efficiency. The lift ring located at the end of the second section is a standard accessory and can lift loads of 550 lbs (250 kg) in any position. And that’s not to mention the many other benefits and options available to ensure that RH aerial ladder equipment meets your specific needs.


rh50dtruck


rh50dspec


Insulated

Model

Working height (A)

11.58m (38') 13.41m (44') 15.24m (50')

Horizontal reach (B)

8.22m (27') 10.05m (33') 11.88m (39')

Length (retracted) (C)

4.56m (15') 5.17m (17') 5.78m (19')

Interior width (D)

49 cm (19") 49 cm (19") 49 cm (19")

Basket capacity

159 kg (350 lbs) 159 kg (350 lbs) 159 kg (350 lbs)

Lifting ring (E)

250 kg (550 lbs) 250 kg (550 lbs) 250 kg (550 lbs)

Rotation

360° ou continue (opt.) 360° ou continue (opt.) 360° ou continue (opt.)

Approx. weight

567 kg (1250 lbs) 612 kg (1350 lbs) 658 kg (1450 lbs)

GVWR min. required

4309 kg (9500 lbs) 7938 kg (17500 lbs) 8620 kg (19000 lbs)

Hydraulic pressure

13790 kPa (2000 psi) 13790 kPa (2000 psi) 13790 kPa (2000 psi)
rh50dbanner

Important


This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.

The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.

We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.

*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside of its production facilities